Makita MAC2400 2.5 HP Big Bore™ Air Compressor - Powerful & Quiet Pancake Compressor for Home DIY, Woodworking, Construction & Automotive Use
Free shipping on all orders over $50
7-15 days international
9 people viewing this product right now!
30-day free returns
Secure checkout
17086341
DESCRIPTION
Product Description Portable Electric Oil-Lubricated Air Compressor, Twin Stack Tank Type, HP 2.5, 115VAC Voltage, Full Load Amps 12.3, Free Air CFM @ 90 PSI 4.2, Max. Pressure 130 psi, Tank Size 4.2 gal., Weight 77 lb., Cylinder Material Cast Iron, Lubrication Type Oil Lubricated, Motor RPM 1730, Avg. Pump Life 2, 000 hr., dBA @ 3 Feet 79.0, Overall Length 19-3/8 In., Overall Width 18-3/4 In., Overall Height 18 In., Compressor Oil Includes. Amazon.com Makita's 2.5HP Air Compressor is equipped with Makita's Big Bore engineered pump cylinder and piston for higher output for two nailers, with less noise and improved job site performance. The MAC2400 delivers industrial power and results with improved durability under tough job site conditions.2.5 HP with Big Bore Engineered PumpThe MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job-site conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore oil-lubricated pump is also more efficient: the MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance, and finned discharge tubing that dissipates heat more efficiently.Versatile Design for a Range of ApplicationsThe MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions. The MAC2400 is just another example of Makita's commitment to innovative technology and best-in-class engineering.About Makita Big Bore Air CompressorsMakita Big Bore Air Compressors deliver higher output and less noise for improved job site performance. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. All Makita Big Bore Air Compressors are oil lubricated and equipped with large automotive style filters for increased air intake and greater efficiency. Makita Big Bore Air Compressors deliver industrial power and results with improved durability.About MakitaMakita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.WarrantyEvery Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.What's in the BoxMakita MAC2400 2.5 HP Air Compressor, oil and 1/4-inch universal quick coupler. From the Manufacturer The new MAC2400 - Twin Stack air compressor by Makita is blowing away the competition. With built-in features such as a super quiet motor that draws only 12.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else. It delivers 4.2CFM @ 90PSI and is equipped with a lever handled ball valve drain system to get rid of condensation build up in the tank . The exclusive finned discharge tubing increases heat dissipation while reducing moisture in the lines and the easily removable cast iron cylinder reduces wear for increased pump life. High quality, maximum performance - just what you expect from Makita. See more
FEATURES
Cast iron pump with Big Bore cylinder and piston is engineered to provide faster recovery time for improved performance
Powerful 2.5 HP 4-Pole motor produces 4.2 CFM at 90 PSI for increased productivity and lower noise
Roll-cage construction provides complete protection to withstand extreme jobsite environments
Low AMP draw reduces incidences of tripped breakers at start-up
Pump is oil-lubricated for cooler running temperatures and reduced wear
Oil lubricated Cooler running pump, minimizes wear
Durable cast iron cylinder reduces wear and increases pump life; Removable for easy maintenance
Powerful 2.5 HP 4 Pole motor produces 4.2 CFM at 90 PSI for increased productivity
Large automotive style industrial air filter for increased air intake and greater efficiency
Pump runs at lower RPM (1,730) resulting in lower noise (79dB) and improved pump durability
REVIEWS
I did some research on many of the compressors out there and chose to go with this model. I looked at the Dewalt, Rigid, Porter Cable pancake deal, and few other no names. I was tempted with the Porter cable deal with the 3 guns but I don't use anything below 18 gauge and I need guns that can carry 2"+ pins/brads. The porter was loud and felt cheap but it did the job as my buddy has one. On the guns I decided to go with the Grex 650L 23 gauge pinner, (amazing gun) and the Hitachi NT 50AE2 18 gauge. I went with this compressor due to the reviews it had from previous customers. I am a carpenter and will use it for crown, base, wainscot and other trim work. Here are my thoughts after using it:Shipping ExperienceI ordered from Amazon to take advantage of free shipping option. Unit came in about 5 days via UPS.Shipping DamageThe box it's shipped in is not very durable considering it's supporting an 80lb compressor. There was just layered cardboard, no foam, peanuts, or Styrofoam molding. Many of the reviews in 2006 stated that air filter is shipped loose and typically damages the gauges. I opened the package and found the air filter in a sealed bag with the manual on top of the unit. After inspection, no damage to gauges were evident. I'm assuming Makita started shipping in the sealed bag after the complaints.There was a however small cosmetic dent on the top tank on the end of the tank the size of a nickle. No scratches, just a small dent. Not surprising once I looked at the shipping box. Not a big deal for me, hardly noticeable. The unit does not look used or reconditioned so I'm assuming it happend during shipping. Not worth the phone call to Amazon as it is small and will not effect performance. It did not effect the rating. Even if I bought it at Home Depot, I wouldn't have returned it due to the dent. It is after all a compressor, not a Porsche. I will dent and scratch the heck out of this thing so that's why I wasn't concerned about a small dent.Oily CaseThere was a light film of oil on the unit though which I cleaned up with a rag. The unit comes with about 10 oz of oil which was sealed with no evident spillage. I recommend you open the package outside or in the garage so your carpets and/or furniture are not effected.SetupI filled the unit with the entire bottle of oil as instructed, opened the valve under the tank, turned it on and let it run for 20-mins to set the piston and lubricate the unit as instructed. The tank fills fast. Both tanks filled from 0 - 130 psi in 1 min 21 sec.NoiseFirst thing I noticed was this thing is extremely quiet for a compressor. You can carry a conversation in the same room without raising your voice. It's really incredible.SizeThe size of the unit is around 2' x 2; x 2'. Nice size. If you have to move around a lot, this is not the tool for you. Great if you only have to move it once, maybe twice a day. The smaller compressors, (one hot dog tank), do not have the pressure and power I needed, this one is perfect size for home use.PowerIf you use a lot of air ratchets, this may not be the best unit. Check the CFM rating on your tools before buying. This compressor offers 4.2 CFM at 90 PSI. Pretty good compared to the rest of them.WeightThe unit is heavy as many have posted. Obviously it's well made from steel, not a plastic rattling piece of crap like many of the other compressors out there which is something I respect. I would rather have something heavy and well made then a light piece of junk that will just break down. I'm not worried about that too much as I decided to just go with longer hoses, (100') to I don't have to move it much unless going another level. I transport it with a collapsable (small) dolly from the car to the site. It weighs about 80 lbs. I am going to make a small furniture dolly for it so it can be moved easily on carpet or cement.FunctionalityThe unit well laid out. The gauges are easy to read, the unit is well balanced with the handle, low vibration, it has rubber feet to prevent marring and reduce vibration. I'm a little nervous about the on/off switch. It's a bit long a feels like it should be more durable. I'm just going to be careful when turning on/off. Don't get me wrong, it's not too thin, I would just wouldn't rush it with that switch.Pro's:Well made & durableWell laid outQuietFills fastFree ShippingGood CFM ratingLow vibrationNo burning wrists as hot components are well protected.Oiled unit, (aids to noise reduction and longevity)Priced appropriately for what you get.Cons:Heavy, 80lbsPoor packaging, (unit may have light damage. Make sure you have a Makita servicing center close by as many have stated that Amazon will not let you return it as oil cannot be shipped due to the flammability aspect.
